First, assess the fire; if it is too big or uncontrollable don't risk your safety by trying to put it out, evacuate the house and call 9-1-1 immediately. If the fire is small enough and can easily be put out and contained, continue to use the P.A.S.S. fire extinguisher technique. Make sure to hold the fire extinguisher with the nozzle. PASS stands for: Pull - pull out the pin from the extinguisher, which will allow you to use the trigger. This may sometimes require a twisting action as well as pulling. Aim - aim the extinguisher's hose at the fire. The way in which you aim may differ depending on the type of extinguisher.
How to use a fire extinguisher PASS
PASS is the acronym used to describe the four essential steps of operating a fire extinguisher. P ull The first step is to pull the pin at the top of the extinguisher. The pin is in place to prevent the handle from being accidently pressed. Immediately test the extinguisher before approaching the fire to ensure it is working correctly. A im Thankfully, PASS is a helpful acronym to help remember the steps necessary when discharging a fire extinguisher. But what does PASS mean when it comes to fire extinguishers? Making sure that your employees, family, and friends are also trained on how to properly use a fire extinguisher is key. PASS is an acronym for: P - PULL Pull the pin from the fire extinguisher. A - AIM Aim it towards the base of the flames. S - SQUEEZE Squeeze the handle. S - SWEEP Sweep the fire extinguisher from side to side across the base of the flames until they are out. 3 Important Things to Ensure Your Safety The PASS System In an emergency, using a fire extinguisher can be frightening, especially if you're unfamiliar with the process. There is an acronym, P.A.S.S., to help you remember the four simple steps: Pull, Aim, Squeeze, and Sweep. Let's break it down now: P - Pull: Pull the safety pin. The safety pin prevents the extinguisher from discharging.
HOW TO USE A FIRE EXTINGUISHER Flame Safety Cornwall Fire Protection Fire Extinguishers
To use a fire extinguisher correctly, experts say that one should remember the acronym P.A.S.S. -- P: Pull the pin. A: Aim at the base of the fire. S: Squeeze the trigger. S: Sweep side to side. But they say the most important lesson of all is when not to try using an extinguisher. It's easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire. A stands for aim the nozzle or hose at the base of the fire. Keep a safe distance away. S stands for squeeze the handle to release the extinguishing materials. S also stands for sweep the nozzle from side to side. Keep aiming at the base of the fire until it's out, and repeat steps two through four if it starts up again. A - AIM at the base of the fire and not at the flames. You must extinguish the fuel to the fire. S - SQUEEZE the lever. This will release the extinguishing agent in the extinguisher. If the handle is released, the discharge will stop. S - SWEEP from side to side.
Fire Extinguisher Training training seminars
By using the acronym P.A.S.S., you can easily remember how to use your fire extinguisher in the event of a fire. P: Pull the safety pin from the handle. A: Aim the extinguisher nozzle or hose at the base of the fire. (not directly at the flames) S: Squeeze the handle slowly to discharge the agent. Remember, if you feel that you cannot safely extinguish the fire using the portable extinguisher available and if you have not already done so, pull the fire alarm, evacuate the area, and then call the fire department. When using an extinguisher, use the PASS system - Pull, Aim, Squeeze, Sweep. Pull the pin on the extinguisher. Aim the.
To help remember the use of a fire extinguisher the acronym PASS was created. This four step simple to use process is as follows: PULL the safety pin on the handle (This will also break the tamper seal) AIM the nozzle at the base of the fire (Don't touch the plastic horn on CO2 extinguishers, it gets very cold and can damage skin.) The PASS method is a simple and memorable acronym that can help you remember the necessary steps to use a fire extinguisher correctly. P - Pull the pin: First, you must remove the safety pin to start using the fire extinguisher. This pin is typically located at the top of the extinguisher and is secured by a plastic or metal seal.
Farm Employee Fire Extinguisher Training
The wording includes the RACE acronym of "Rescue, Alarm, Confine, Extinguish" for firefighting procedures as well as the PASS acronym of "Pull the pin, Aim at base of fire, Squeeze handle, and Sweep side to side" for extinguisher usage. The slogan "One race you have to win!" is centered at the bottom of the sign. View Product Details Select Options R.A.C.E. stands for remove, alert/alarm, confine/contain, and extinguish. While your team might already have the proper training on what to do in a fire emergency, parts of your these strategies can become lost in a panic. Here are descriptions of each of these steps. Remove Occupants from the Building
