ARALDITE STANDARD CEYS Adhesivo de dos componentes
March 2014 Araldite® AW4859 / Hardener HW4859 Page 3 of 6 Average lap shear strengths of typical metal-to-metal joints (ISO 4587) (typical average values) 1) Cured for 16 hours at 40°C + 1h at 80°C and tested at 23°C. Pretreatment - Sandblasting + degreasing As-made value 2) Other cure cycles, on aluminium and tested at 23°C. With an epoxy resin base. Suitable for many materials with the exception of PP, PE, PTFE, PVC and acryl. Fast-setting, heat-resistant up to +100 °C, resistant to alcohol, water, petrol, mineral oils and similar substances, mixing 1:1. November 2014 Araldite ® Crystal Page 2 of 3 Huntsman Advanced Materials Application of adhesive The resin/hardener mix is applied directly or with a spatula to the pretreated and dry joint surfaces. A layer of adhesive 0.05 to 0.10 mm thick will normally impart the greatest lap shear strength to the joint. Huntsman Araldite® 2014 structural adhesive is available in cartridges with incorporating mixers and can be applied as ready-to-use adhesive with the aid of the tool recommended by Huntsman Advanced Materials. Each cartridge comes with one mixing nozzle, but additional nozzles may be ordered separately. Unused portions of the epoxy components should be.
Araldite industrial 2 componentes total de 1800g (1000g + 800g) R4Nautic
Grey paste. High temperature and chemical resistance. Very resistant to water and to a wide variety of chemicals. Gap filling, non sagging up to 5mm thickness. Description. Araldite® 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good. Araldite 2017(XD 4417/XD 4420) 2 Two component flexible epoxy adhesive Key properties • Tough flexible bonds • Rapid setting • High peel strength Description Araldite 2017 is a two component, room temperature curing, liquid adhesive of high peel strength and toughness. Araldite® 2012 Two component epoxy paste adhesive. of high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubbers, rigid. of high strength and toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubbers, rigid. plastics, and most other materials in common use. Araldite® 2011 is a multipurpose, two component, room temperature curing adhesive of high strength and toughness. Araldite® 2011 is a multipurpose, two component, room temperature curing adhesive of high strength and toughness. common use. It is a versatile adhesive for the craftsman as well as most industrial applications.
ARALDITE STANDARD CEYS Adhesivo de dos componentes
Description. Araldite® Standard is a multipurpose, two component, room temperature curing, adhesive of high strength and. toughness. It is suitable for bonding a wide variety of metals, ceramics, glass, rubber, rigid plastics and most other materials in common use. It is a versatile adhesive for the craftsman as well as most industrial. January 2015 Araldite ® Standard Page 2 of 3 Huntsman Advanced Materials Application of adhesive The resin/hardener mix is applied directly or with a spatula to the pretreated and dry joint surfaces. A layer of adhesive 0.05 to 0.10 mm thick will normally impart the greatest lap shear strength to the joint. HuntsmanAraldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Used for bonding of metals, electronic components, GRP structures and many other items where a higher than normal temperature or more aggressive environment is to be encountered. 2-Component epoxy adhesives. ARALDITE® 2011 Versatile and long pot life. ARALDITE® 2012 Versatile and fast curing. ARALDITE® 2014-2 Highly chemical and temperature resistant. ARALDITE® 2015-1 Dynamic load resistant and suitable for dissimilar substrates. ARALDITE® 2019 (AW 4859/HW 4859) High-end carbon composites bonding. ARALDITE® 2031-1 
