The ASTM A537 specification is the Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel used in the applications of fusion welded pressure vessels and structures. ASTM A537 standard refers to pressure vessel plates, material in heat-treated, carbon-manganese silicon steel. Based on different strength and heat treatment, it ranges to Class 1, 2 and 3. The maximum thickness under ASTM A537 Class 1 is 100 mm [4 inch], and 150 mm [6 inch] for Class 2 and Class 3. Referenced Documents ASTM Standards:
A537 CL1 Weathering steel, Steel sheet, Steel plate
High -strength heat-treated ASTM A537 PVQ steel plate is ideal for both boilers & pressure vessels. Request a quote from Leeco Steel online today! Material Properties The following material properties are ASTM specifications and will be confirmed on the Mill Test Report. Class Yield Point (ksi) Tensile Strength (ksi) 1 - 2.5 in. thick and under. ASTM A537 Class 1 carbon steel plates are engineered to be used in pressure vessel applications. Applications of ASTM A537 Class 1 Carbon Steel Plate The material is a normalised steel which is heat treated and as a consequence displays greater yield and tensile strength than the more standard ASTM A516 grades. A537 CL1 steel plate/sheet for simple pressure vessels steel . A 537 Class 1carbon steel plates are engineered to be used in pressure vessel applications .A537 Class 1 steel plates shall be normalized in all of thickness. A 537 steel material usual be serviced the Gas, Petrochemical TJC Steel can supply A537 Class 1/ A537 Cl1 pressure vessel steel plate, mainly used in construction for pressure vessels. Related Standards This material data has been provided by TJC Iron & Steel. "Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology.
A537 CL1 Weathering steel, Steel plate, Steel
The ASTM A537 specification is the Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel used in the applications of fusion welded pressure vessels and structures. Typical applications are pressure vessels designed for moderate and lower-temperature service requiring excellent notch toughness as well as API 650 and API 620 storage tanks. A537 CL1 Normalized Pressured Vessel Steel Plate Descriptions: ASTM A537 standard refers to pressure vessel plates, material in heat-treated, carbon-manganese silicon steel. Based on different strength and heat treatment, it ranges to Class 1, 2 and 3. A537 cl1 Pressure Vessel Plate is ideal for constructing pressure vessels and fabrication of tank. It is best known for its ultimate strength, which makes it excellent for industrial purpose. a537 cl2 Heavy plate is a material which is widely used in the fabrication of boilers and pressure vessel,. A537 CL1 | SG Steel. Specs of ASTM A537 Class 1 heat-treated carbon manganese silicon steel plates intended for fusion welded pressure vessels and structures.
A537 CL1 Corten steel, Steel, Weathering steel
The ASTM A537 Class 1 steel plate with a thickness no greater than 64 mm [2-1/2″] can be applied to ASME B31.3 process piping. The plates shall be normalized with minimum yield strength and tensile strength of 50 ksi [345 MPa] and 70 ksi [485 MPa], respectively. The UNS designation of ASTM A537 Class 1 is K12437 and its P-Number is 1. Cross reference table for Steel A537CL1 ( AISI, ASTM, UNS) and its European equivalent P355N (1.0562) ( EN ) European equivalent grade for Non-alloy room temperature quality steel A537CL1 ( AISI, ASTM, UNS): P355N (1.0562) Chemical composition and properties of european equivalents (EN) for A537CL1 (USA, AISI, ASTM, UNS):
ASTM A537 Class 1 Steel Plates commonly used in the fabrication of industrial pressurised vessels and boilers.ASTM A537 CL.1 plates are engineered to be used in pressure vessel applications.SA537 CL.1 plate specification covers the standard for heat-treated carbon manganese-silicon steel plates intended for fusion welded pressure vessels and structures. Paddle Spacer. *Flange types available made from ASTM A537 Cl.1 plates. A series of pipe flanges can be manufactured from ASTM A537 Class 1 plates covering blind flanges, line blanks, slip-on plate flanges, and reducing flanges without hub. The ASTM A537 Class 1 plates refer to normalized C-Mn-Si steel pressure vessel plates intended for fusion.
ASTM A537 Cl1 Exporters, Suppliers, Wholesalers,Iron and Steel Pipes
A537 CL.1 Specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mm Third Party Inspection for A537 CL.1: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department. A537 CL.1 Chemical composition % of the Product analysis of grade A537 CL.1 Mechanical Property ASTM A537 CL.1 Equivalent The steel is ideal for use in pressurised service both in boilers and pressure vessels and Masteel UK Limited supplies A537 Class 1 /SA 537 CL 1 steel plates to the world's leading fabricators who in turn serve the Oil, Gas and Petrochemical industry. we also can supply A537 CL2, A537 CL3 ,please contact us if you need
