1. Standards 2. Ledger 3. Transoms 4. Bracing 5. Base Plates 6. Sole Boards 7. Working Platform 8. Guardrails 9. Toeboards 10. Couplers 11. Toe boards Conclusion Scaffolding Parts or Components When it comes to scaffolding parts or components, there are a few key pieces that you need to be aware of. Main transoms are an integral part of a scaffold structure that holds the two rows of standards in position. The main transoms can be fixed directly across to each pair of standards with right-angled couplers. Or, fixed to ledgers using putlog couplers, which must be fixed within 300mm from each pair of standards.
Transom Scaffolding, Transom Scaffolding
What Transoms Mean to Your Scaffolding Platforms: Mid, Ledger to Plank, and Plank to Plank Transoms are underutilized components that work great for creating safe gaps in platforms or closing unwanted gaps in platforms, safe, cleanly and efficiently. Transoms, or bearers, are horizontal members that meet the ledgers at right angles. The role of a transom depends on the type. Main transoms provide support for the standards and the working platform by holding them in position. Transoms Transoms or bearers, placed on top of ledgers and at right angles to them, run horizontally from back to front, defining the bay width. Main transoms provide support for standards by holding them in position as well as supporting boards or planks. Intermediate transoms are placed alongside main transoms to lend additional board support. Scaffolding Transom A horizontal member supported on standards, on which the scaffold planks are laid. Also used as safety rails to end bays. Ledger A horizontal member supported on standards, on which the transoms are laid in tube and coupler work.
Scaffolding Kwikstage Scaffolding 2ft Transom
Transoms Transoms Altrad Generation Lightweight Readylok and extendable transom scaffold units will, at low cost, immediately convert your stock of scaffold tube and scaffold fittings into an easily and speedily erected system scaffold. The use of these pre-coupled units dramatically eliminates the need for loose fittings. Information VR Readyloks are a mobile transom system that prefabricates a transom tube and 4 fittings to produce a rigid unit that speeds scaffold erection, VR Readylok are designed to be used in conjunction with standard scaffold tubes and ledgers or extendable transoms to form 5 - 4 or 3 board wide system access scaffold. The Transom is designed such that it enables the splitting of a bay to create an opening between decked. platforms. Transom provides mid-bay support for scaffolding boards by spanning between the inner and outer ledgers. This member is also used for the supporting of Timber scaffolding boards when system decks are not used. Request for Quote. 1 size available More info Quick add A unique solution for the creation of boarded platforms within traditional tube and fitting scaffolds. Altrad Generation Extendable Intermediate Transoms combines three loose components into one easy to assemble item that is suitable for use with traditional tube and fittings, and with Readylok transoms.
What Are Ledgers, Standards and Transoms? Network Scaffold Network
Quick add Altrad Generation Readylok Transoms are made to predetermined sizes, fully plated, with preset vertical and horizontal couplers to enable standards and ledgers to be perfectly positioned. This saves a considerable time in measuring and setting out. The result is a fast and fool proof system with its own, high, built in. Mid Transom. 01.20.305.00. 10'0″ / 3.05m. 27.39 / 12.45. Mid Transom EU. 01.20.307.50. 10'1″ / 3.07m. 26.66 / 12.12. The Adapter for the 0.3u0016m Caster is used as a base connection point to a 0.3u0016m Caster and provides a base spigot to use with standards or Base Collars to begin scaffold construction.
The Mid Transom is designed to create a transom at the plank level anywhere inside of a bay by straddling the outer Ledgers/Transoms. Mid Transoms can also be used to create openings within the planked bay for Ladder access or to avoid a permanent obstruction. Product. Length. In architecture, a transom is a transverse horizontal bar, or beam, which separates a door from a window. While transoms have a slightly different meaning in the world of scaffolding, it provides us with a decent indication as to what they are and what they are used for. Transoms are typically horizontal tubes which span across the ledgers.
1.2m HDG Cuplock Transom Scaffolding System from China manufacturer
Scaffold Transoms are horizontal load-bearing scaffold components for supporting planks. Available in sizes between 0.7M to 2.4M that can hold 3 to 10 planks. Testing is done on central load points to ensure all Transoms can load-bear tools, materials, and personnel. Benefits Australian standard manufacturing Durable galvanised steel The Genlok inside board transom drops into place over the ledgers and is secured with a locking device to prevent movement. It extends beyond the inside ledger and provides intermediate support to a single inside board. It should be used with hop-up brackets where the distance between standards exceeds the span of scaffold boards.